Contributing to Conda

New Issues

If your issue is a bug report or feature request for:

Code of Conduct

The conda organization adheres to the NumFOCUS Code of Conduct.

Development Environment

  1. Signup for a GitHub account (if you haven’t already) and install Git on your system.

  2. Fork the conda repository to your personal GitHub account by clicking the “Fork” button on https://github.com/conda/conda and follow GitHub’s instructions.

  3. Clone the repo you just forked on GitHub to your local machine. Configure your repo to point to both “upstream” (the main conda repo) and your fork (“origin”). For detailed directions, see below:

    Bash (macOS, Linux, Windows)

    # choose the repository location
# warning: not the location of an existing conda installation!
$ CONDA_PROJECT_ROOT="$HOME/conda"

# clone the project
# replace `your-username` with your actual GitHub username
$ git clone [email protected]:your-username/conda "$CONDA_PROJECT_ROOT"
$ cd "$CONDA_PROJECT_ROOT"

# set the `upstream` as the the main repository
$ git remote add upstream [email protected]:conda/conda

    cmd.exe (Windows)

    # choose the repository location
# warning: not the location of an existing conda installation!
> set "CONDA_PROJECT_ROOT=%HOMEPATH%\conda"

# clone the project
# replace `your-username` with your actual GitHub username
> git clone [email protected]:your-username/conda "%CONDA_PROJECT_ROOT%"
> cd "%CONDA_PROJECT_ROOT%"

# set the `upstream` as the main repository
> git remote add upstream [email protected]:conda/conda

  4. One option is to create a local development environment and activate that environment

    Bash (macOS, Linux, Windows)

    $ source ./dev/start

    cmd.exe (Windows)

    > .\dev\start.bat

    This command will create a project-specific base environment (see devenv in your repo directory after running this command). If the base environment already exists this command will simply activate the already-created devenv environment.

    To be sure that the conda code being interpreted is the code in the project directory, look at the value of conda location: in the output of conda info --all.

  5. Alternatively, for Linux development only, you can use the same Docker image the CI pipelines use. Note that you can run this from all three operating systems! We are using docker compose, which provides three actions for you:

    • unit-tests: Run all unit tests.

    • integration-tests: Run all integration tests.

    • interactive: You are dropped in a pre-initialized Bash session, where you can run all your pytest commands as required.

    Use them with docker compose run <action>. For example:

    Any shell (macOS, Linux, Windows)

    $ docker compose run unit-tests

    This builds the same Docker image as used in continuous integration from the Github Container Registry and starts bash with the conda development mode already enabled. By default, it will use Python 3.9 installation.

    If you need a different Python version, set a CONDA_DOCKER_PYTHON environment variable like this to rebuild the image. You might need to add --no-cache to make sure the image is rebuilt.

    Bash (macOS, Linux, Windows)

    $ CONDA_DOCKER_PYTHON=3.8 docker compose build --no-cache unit-tests

    cmd.exe (Windows)

    > set CONDA_DOCKER_PYTHON=3.8 && docker compose build --no-cache unit-tests && set "CONDA_DOCKER_PYTHON="

    The next time you run docker compose run <task> you will use the new image. If you want to revert to the version you were previously using, you need to rebuild the image again.

The conda repository will be mounted to /opt/conda-src, so all changes done in your editor will be reflected live while the Docker container is running.

Static Code Analysis

This project is configured with pre-commit to automatically run linting and other static code analysis on every commit. Running these tools prior to the PR/code review process helps in two ways:

  1. it helps you by automating the nitpicky process of identifying and correcting code style/quality issues

  2. it helps us where during code review we can focus on the substance of your contribution

Feel free to read up on everything pre-commit related in their docs but we’ve included the gist of what you need to get started below:

Bash (macOS, Linux, Windows)

# reuse the development environment created above
$ source ./dev/start
# or start the Docker image in interactive mode
# $ docker compose run interactive

# install pre-commit hooks for conda
$ cd "$CONDA_PROJECT_ROOT"
$ pre-commit install

# manually running pre-commit on current changes
# note: by default pre-commit only runs on staged files
$ pre-commit run

# automatically running pre-commit during commit
$ git commit

cmd.exe (Windows)

:: reuse the development environment created above
> .\dev\start.bat
:: or start the Docker image in interactive mode
:: > docker compose run interactive

:: install pre-commit hooks for conda
> cd "%CONDA_PROJECT_ROOT%"
> pre-commit install

:: manually running pre-commit on current changes
:: note: by default pre-commit only runs on staged files
> pre-commit run

:: automatically running pre-commit during commit
> git commit

Beware that some of the tools run by pre-commit can potentially modify the code (see black, blacken-docs, and darker). If pre-commit detects that any files were modified it will terminate the commit giving you the opportunity to review the code before committing again.

Strictly speaking using pre-commit on your local machine for commits is optional (if you don’t install pre-commit you will still be able to commit normally). But once you open a PR to contribue your changes, pre-commit will be automatically run at which point any errors that occur will need to be addressed prior to proceeding.

Testing

We use pytest to run our test suite. Please consult pytest’s docs for detailed instructions but generally speaking all you need is the following:

Bash (macOS, Linux, Windows)

# reuse the development environment created above
$ source ./dev/start
# or start the Docker image in interactive mode
# $ docker compose run interactive

# run conda's unit tests using GNU make
$ make unit

# or alternately with pytest
$ pytest -m "not integration" conda tests

# or you can use pytest to focus on one specific test
$ pytest tests/test_create.py -k create_install_update_remove_smoketest

cmd.exe (Windows)

:: reuse the development environment created above
> .\dev\start.bat
:: or start the Docker image in interactive mode
:: > docker compose run interactive

:: run conda's unit tests with pytest
> pytest -m "not integration" conda tests

:: or you can use pytest to focus on one specific test
> pytest tests\test_create.py -k create_install_update_remove_smoketest

Note: Some integration tests require you build a package with conda-build beforehand. This is taking care of if you run docker compose run integration-tests, but you need to do it manually in other modes:

Bash (macOS, Linux, Windows)

$ conda install conda-build
$ conda-build tests/test-recipes/activate_deactivate_package

Check dev/linux/integration.sh and dev\windows\integration.bat for more details.

Conda Contributor License Agreement

In case you’re new to CLAs, this is rather standard procedure for larger projects. Django and Python for example both use similar agreements.

Note: New contributors are required to complete the Conda Contributor License Agreement.

For pull requests to be merged, contributors to GitHub pull requests need to have signed the Conda Contributor License Agreement, so Anaconda, Inc. has it on file. A record of prior signatories is kept in a separate repo in conda’s GitHub organization.

Releasing

Conda releases may be performed via the rever command. Rever is configured to perform the activities for a typical conda-build release. To cut a release, simply run rever <X.Y.Z> where <X.Y.Z> is the release number that you want bump to. For example, rever 1.2.3.

However, it is always good idea to make sure that the you have permissions everywhere to actually perform the release. So it is customary to run rever check before the release, just to make sure.

The standard workflow is thus:

$ rever check
$ rever 1.2.3

If for some reason a release fails partway through, or you want to claw back a release that you have made, rever allows you to undo activities. If you find yourself in this pickle, you can pass the --undo option a comma-separated list of activities you’d like to undo. For example:

$ rever --undo tag,changelog,authors 1.2.3

Happy releasing!